Thanks Mark, will order one tonight. Had the tail complete, raised up and hit my head on one of the VOR antenna, and kerplow, broke.
Thanks again
Mark
Bummer. You can see from the photo in my previous post that mine was repaired, by an avionics guy, on a bench. Cleaned up connectors, re-soldered, etc. Much easier than trying to stand on a ladder trying to fix it.
We tied twine to bottom end of the coax and pulled the coax up through the tail, and were able to use the twine to pull the coax back down through the tail and through the rubber grommet.
Good luck.
