Club Homepage Forums Classified Ads Buy & Sell - Airplanes Only 1973 Cessna 150L

1973 Cessna 150L. Gone through over the last few years. Total Time 3600, Engine 875 SMOH, 75 since top-end with new Millennium cylinders, Prop 3600 Total time. Interior redone, new avionics, ABSB in and out, instruments redone, jpi fuel scan, king 155 com/nav with gs, king 97A com, Aera 660 gps dash mounted, new landing lights and nav and strobes, electrical panel with new switches and cb’s. Rebuilt front strut, brakes and brake cylinders, air wolf oil separator, Rosen sunvisors, seats redone in leather, new carpet, new bushings in flight controls, new baffles, new throttle, mixture and carb heat cables, remote oil filter, new digital clock, new next gen ELT, Skytech light wgt starter. Adlog maintenance schedule, all AD’s up to date. Come take a look. Nice flying 150. About 5.5 gals and hour cruise. Life time membership in Cessna150/152cessna Aero Club transfer. Never used in a flight school. Contact Mark 602-920-6737.
Aircraft is hangered at Falcon Field, AZ (FFZ). Asking 41000
Any help to add photos would be greatly appreciated!! Apple guy.
Can see photos on Craig’s list for Phoenix, AZ listed under Cessna
my 150 is no longer for sale, working an oil problem.

Mark, I sent you a PM.

Here is the link to your Craig's list ad. Very nice aircraft!

https://phoenix.craigslist.org/evl/avo/d/gilbert-cessna-150/6859245810.html

Thanks

Really nice, Mark! I think I have a pretty good idea of what you have been doing in your spare time! What a great looking airplane!

Thank you Stacy
Been fun redoing it and flying it😎

Antonio
Thanks for the Craig’s list short cut
Mark

Mark,
Great job really nice. I have been doing the same thing on a 1972 150L Commuter. Have to finish painting the wings this spring.
I have to ask where did you get the panel and circuit breakers and new switches.
Greg

Greg
All the switches and cb’s were from a good friend who is an Avonics guy. We even rebuilt the main buss bar behind the panel. Also added new wiring. I built the black panel had it power coated and attached the stickers and covered with clear coat paint. I have another panel that is being silk screened to replace the cover on now for a little nicer look.
I was really happy how it turned out.
Thanks again. I am deciding on whether to paint the outside or not.
Mark

Mark,
Really nice job. Thanks for the Ideal, wanted to do something with mine it nice to see one already done. I'm a plant electrician by trade with a son who is a A/P. This is a real blessing. I will post pics when I get finished.
Greg