Originally Posted by Patrick Lienhart
If possible, could you check the following please on the GNC420W:

1. Press and hold CLR until the default NAV page displays

2. Turn the large right knob to select AUX page group

3. Turn the small right knob to select SETUP 2

4. Select COMM configuration

5. Check if you can change from 25 kHz to 8.33 kHz
(Note: for US, 25khz must be set).

Thanks!
Yes Sir. The Garmin does both spacing. The PAR200a can also switch between 25 kHz and 8.33 kHz.
Attachments
image.jpg image.jpg

Last edited by Geoff Vincent; 11/15/20 09:32 PM.
Geoff
[Linked Image from animatedimages.org] [animatedimages.org]
[Linked Image from visitedstatesmap.com]
N10473
Huh I don't know

https://youtu.be/klsTowdcEsk?si=Pdpa3h_r0aMRw3Hl