A Sparrowhawk prop and spinner is also available for $1,000.
What are the details on the prop and spinner?
I'm in Anchorage tonight and don't have the prop log with me, but it is the Sensenich prop specified in AirMods STC SA1008NM for the Sparrowhawk conversion. It has been inspected and found to meet the manufacturers specs and is ready to fly.
It and the spinner came with the 152 Sparrowhawk wreck that I bought and is in good shape. It was inspected after the wreck and found to be undamaged. The wreck happened in the deep snow, and the plane spun around it's vertical axis, so the prop didn't strike anything and there was no damage to repair.
It does have a spot on one side that was a ding from a small rock (very common in Alaska) and it was filed out by a mechanic and isn't a problem, but like most props in Alaska (including the one on my airplane) it isn't flawless. It has not been on an airplane since the inspection by the prop shop, so I am confident that it is good to go.
The spinner is the same one specified in the STC for the Sparrowhawk. The only reason the prop and spinner isn't on my 152 is that mine already had the Sensenich prop and spinner so the mechanic used mine instead of the other. Both props and spinners were in the same shape, but one was at the mechanic's hanger and the other was at my house. So I have a spare to sell or keep as a spare.
You can have the prop and spinner for $1,000 + shipping.
