Club Homepage Forums Classified Ads Buy & Sell - Everything But Airplanes WTB 150M spinner

I am looking for a complete spinner assembly for a '77 150M to include the bulkheads.

On Friday, I relocated Nicks 150M down to dads hangar for its annual and engine swap. During my preflight, I noticed a crack radiating out from the cut out for the prop on the spinner. With the advice of an A+P on the field, I elected to remove the spinner and continued with the flight.

When I arrived at dads hangar, we removed the prop to inspect the rear bulkhead. Once the prop was removed, we found the rear bulkhead to also be cracked!

So..... I am now looking for a complete spinner assembly. Spinner PN 0450042-1, Rear bulkhead PN 0450046-3, and forward bulkhead PN 0450050-1.

Thanks

Bengie??

Not sure and don't remember if his are gone? He's converting to a big nose.



Jim

No longer available,,, Mr. Buchner got mine a month ago.

Bummer, thanks anyhow!

I have just a spinner, if that is of any interest to ya.

I've got a few of them. I'm not home until July 23rd. If you haven't found one buy then I'll send you pics and info on mine.

Nick found one with bulkheads and ordered it. Thank you anyhow guys.

It turns out that the spinner Nick bought on ebay will not fit his 150. The bulkheads were wrong and the spinner was larger than what he originally had. It was listed for a 150 but I am guessing that it was either for a 152 or a "Big Nose" 150.

Scott, do you have the bulkheads to go along with your spinner?

Mike, do you have any pictures of the spinners that you have for sale?

Thanks

If it's for a "big nose" he may have just scored a bargain. Apparently these are hard to come by.

I have the rear bulkhead, but not the forward (plastic) one.