I’m still trying out a couple of different things on the old spinner. I have build a replacement piece for the missing section lost in flight. I added a “belt “ to a bolster the skirt of the spinner as it fastens to the hub. I was trying to avoid welding the repair because I believe it made the original repair of last year brittle. Hence the reason I lost the small 3x4 in section. I have used adhesives with the belt and have about 7 hours on it but can see that the adhesive is not a long term solution. So as of today it is back on my bench and I am going to weld it with my AL mig. I’m optimistic that the belt plus adhesive plus welding brings me a long term solution. I will add photos and write up.later.
Last edited by Raymond Olsen; 08/19/24 08:45 PM.
