I have a 1965 Cessna 150 "E" model. As you can see from the picture (looking up from the ground) my rudder bell crank has some extensive corrosion and I would like to replace the bell crank. According to the parts manual the part number for this part is 0431003-1 and is used on all models. If you have one of these or know were I can get one please let me know. The bell crank is riveted to the bottom rib of the rudder. Ideally, I would like the whole bottom rib with the bell crank installed. My plane is a straight tail so the bottom rib of a later model might not fit so the bell crank would need to drill the rivets out. Thanks in advance.
Elliot
Attachments
Bell crank Rudder (900 x 675).jpg (78.52 KB, 50 downloads)

"Maintain thy airspeed, lest the ground arise and smite thee".
[Linked Image from visitedstatesmap.com]